We’ve all been there- you’re in the middle of a shower and suddenly the water starts to back up. Or you go to do the dishes and the water won’t drain. These are both common drain issues that can be easily fixed with a little know-how. In this blog post, we’ll go over some of the most common drain issues and how to fix them. So next time your drain starts acting up, you’ll know just what to do!
How does a draining work?
A drainage system is a network of pipes and other structures that remove excess water from an area. The system typically includes a main sewer line, smaller secondary lines, and a series of catch basins or manholes that allow water to enter the system. Gravity pulls the water through the system and into a treatment plant, where it is cleaned and released back into the environment.
Local plumbers in Bass Hill, Sydney do complete drain studies when installing a new system or if you have noticed problems with an existing system. This will help ensure the drainage system is designed to remove water from your property in the most efficient way.
What are the most common drain problems?
It can be frustrating and worrying to discover drain problems on your property. Plumbing experts want to alleviate these worries whenever possible. This guide will help you narrow down the potential causes of drain problems in your system.
You can read on to find out what could be causing you concern or call the plumbing experts in Baulkham Hills immediately if you would like professional services for drain cleaning franklin township nj performed as quickly as possible.
Blocked Drains
Most likely, your drains will have a blockage or become clogged from something being washed down. This can happen gradually or over time depending on the cause. A blockage can be caused by large objects, such as toys for children, which may get washed down the drain. Over time, grease, oil, and cooking fats that are washed down the kitchen sinks can stick together and accumulate over months or even years.
Sometimes, you might hear a sound in your pipes that could indicate a blockage.
Mud
Your problem may be located in an outdoor drain. This could indicate that there is a possibility that the blockage is caused by silt, mud, or leaves that have been washed into your system. This is common, especially in heavy rains, storms, and later in autumn and winter.
Cracked Drains
Drains can sustain a lot more damage and wear over time than other parts. Cracks and fractures can occur in drains. These cracks may be found around joints, but also along the pipe sections if the damage is severe enough. This can lead to waste and sewer water leaking into your property or onto your basement floors if you have one.
Rust or limescale
Limescale can also build up in pipes over time, restricting water flow and shrinking the pipes’ diameter. Cast iron pipework can also be affected by rust.
Collapsed Drains
Your pipes will start to wear out over time. The drain could burst if nothing is done about it. If this happens, the pipe can burst and let wastewater seep onto your property. This can cause significant damage to your property and pose a risk to your health.
Please report any drain that has burst or is leaking sewage to us immediately so we can take the necessary steps.
Invasive Tree Roots
Tree roots grow because they need water and nutrients. Pipes from your property can provide both. One small root can find its way through the drains and grow, eventually causing the drains to get wider. This can cause damage to cast iron pipes and block your system.
Conclusion
Drain inspection is an important part of your regular maintenance. If you notice any of the above problems, please do not attempt to fix them on your own. We recommend that you contact a professional plumber to take care of it. A certified plumber in Bexley will have the necessary equipment and training to fix any drain issue quickly and professionally.
